Cobra Springs Volvo V70 Mk2 2wd COBRALS8031C 15/15mm

£168.50

Cobra Springs Volvo V70 Mk2 2wd COBRALS8031C suitable for S ESTATE, model year 03/2000-2007 with 2.3/2.4-T5 (247 / 256 BHP ) engine.This lowering springs kit will lower your vehicle by Front: 15mm and Rear: 15mm. Product notes (if any are applicable): FOR CARS with LEVEL THE REAR SHOCK HAS TO BE REPLACED BY VOLVO SHOCK: 8671-712 (VOLVO S80) 56. Mount the rear SPRING with the progressive part down !!. this is very important. TUV if applicable: TUV All kits include 4x quantity lowering springs (unless stated otherwise in notes). Some car models kits come in various drops.

SKU: COBRALS8031C Category: Tags: ,

Description

Cobra Springs Volvo V70 Mk2 2wd COBRALS8031C suitable for S ESTATE, model year 03/2000-2007 with 2.3/2.4-T5 (247 / 256 BHP ) engine.

This lowering springs kit will lower your vehicle by Front: 15mm and Rear: 15mm.

Product notes (if any are applicable):

FOR CARS with LEVEL THE REAR SHOCK HAS TO BE REPLACED BY VOLVO SHOCK: 8671-712 (VOLVO S80)

56. Mount the rear SPRING with the progressive part down !!. this is very important.

TUV if applicable: TUV

A set of superb quality lowering springs designed to meet the demands of many modified car fans!

All kits include 4x quantity lowering springs (unless stated otherwise in notes).

Some car models kits come in various drops.

 

About this Cobra Springs Volvo V70 Mk2 2wd COBRALS8031C kit:

For over 30 years Cobra has designed and made springs for both race and streetcars. With Cobra Springs you can enjoy improved handling while at the same time, maintaining ride quality and safety.

Cobra Suspension cold wind springs from high tensile chromium-silicone wire sourced from premium European steelmakers on CNC Coilers. They heat treat and shot-peen the springs which greatly improves strength and product life. The finished product is then treated with phosphate and finally resin powder coated for a hard shell resistant to corrosion.

Cobra redesigns the OE spring and then lower the centre of gravity to dramatically improve your vehicles performance and appearance. The progressive springs rate allows the Cobra Suspension to improve handling, without sacrificing comfort.

About Cobra

In the early 1980s, Cobra started out working with race teams in the Dutch Touring Car Championship on cars such as the BMW E30 and Mercedes W201. During the 1980s the primary focus was sport suspension development for race cars, tuners and special projects for car distributors.

In 1995 suspension specialists teamed up with Holland’s leading spring factory to form Cobra Suspension. The mission: To develop a full range of high quality lowering springs and shock absorbers, and went on to become one of the leading names in sport suspension.

The technology used to develop cutting edge racecar suspension is also the very same used for developing new components for streetcars. Cobra Suspension includes one of the biggest product line-ups in the industry including streetcars, amateur racing cars, and top-level sports cars.

Suspension by Cobra is tested under extreme conditions, results which allow for further development for cars on the street.  In addition to its high-quality control, Cobra also fulfils quality standards such as TUV.  Almost all the products leaving the warehouse bear all the necessary certificates.

 

This Cobra Springs Volvo V70 Mk2 2wd COBRALS8031C kit, like All Cobra Lowering Spring Kits Feature:

  • Drops available from 20-80mm
  • Stiffer ride to increase cornering speed and road holding
  • Progressive wound for comfort
  • Shot peened for high strength
  • Powder-coated to prevent rust
  • Superb looks and quality
  • TUV approved quality
  • 12-month warranty

 

Please contact us for price match discounts on any Cobra lowering springs!

When replacing the suspension, we advise replacing items such as mounting cups due to wear and tear. Using old worn parts can cause vibration or knocks so we recommend changing these parts at the same time.

Stated drop rates may vary,  plus 10 mm or minus 10mm (approx). This depends on vehicle spec, options, tolerances & age. E.g. pickup conversions, with more or less rear weight.

*Please note: After any ride height adjustment, we recommend the vehicle’s geometry is checked and re-aligned if needed, using suitable equipment. Not doing so can result in uneven or excessive tyre wear, and in some cases even affect how the vehicle handles.

Based on the wheels fitted, some vehicles may need wheel spacers and also arch mods for fitment after lowering. Please check before ordering.

If you are unsure about the fitment of this Cobra Springs Volvo V70 Mk2 2wd COBRALS8031C kit, please email us.

For further information regarding Cobra Lowering Springs, you can visit their site: https://www.cobra-suspension.com/en/home/

Mainland UK postage is free, however as many kits come from European stock, and are often made to order, please allow up to 3-6 working days for delivery.

Additional information

Weight20 kg
Dimensions60 × 40 × 20 cm

Reviews

There are no reviews yet.

Be the first to review “Cobra Springs Volvo V70 Mk2 2wd COBRALS8031C 15/15mm”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.