Raffa RS-01 Gloss Black finish 19 and 20-inch alloy wheels (set of 4 wheels).
Available in 19×8.5″, 19×9.5″, 20×9″ and 20×10.5″ sizes, and can be had as same size all-round or staggered.
This wheel is also available in 3 other finishes.
This is a load rated, Y-spoke design alloy wheel.
Raffa RS-01 Gloss Black Wheel PCD Fitment to fit 5 studs 5×112 and 5×120 PCD vehicles.
5×112 PCD to fit Audi, Seat, Skoda, Volkswagen, Some BMW, Mercedes, Larger Mini plus others.
5×120 PCD to fit BMW, Land Rover, Tesla, Commercial VW, Bentley, Larger Mini plus others.
The spec of this alloy wheel is as follows:
|Wheel Size||PCD||Offset||Centre Bore||Load Rating|
To find out your wheel stud/lug fitment please see our Alloy Wheel Fitment Guide.
Fitments not mentioned above may be available on these wheels using spacer adaptors or vari-bolts, (please email us if unsure about this).
Load rated to 650kg per wheel.
Centre bore size is 66.6mm, (any car smaller than this it will fit the centre bore).
You may use a different offset to the manufacturer standard wheel, (for example to create a wider track).
Some vehicles may require wheel spacers and arch modifications for fitment, please check before ordering.
Please note: The Raffa RS-01 Gloss Black is supplied with a fitting kit supplied free of charge if the wheel is not a direct fit to the centre bore. This includes nuts or bolts if current ones are no longer suitable.
For any further information on Raffa alloy wheels including various images of wheels on different vehicles, you can visit the Raffa Facebook page.