Axe EX30 Gloss Grey 20-inch alloy wheels (set of 4 wheels).
20×8.5″ and 20×10″ sizes are available.
This alloy wheel can be had as the same size all-around or staggered fitment (wider rear) and is also available in various other finishes.
This is a strong, load-rated, Y-spoke or multi-spoke design alloy wheel.
Axe EX30 Gloss Grey will fit most 5 Stud PCD cars.
To find out your wheel stud/lug fitment have a look at our Alloy Wheel Fitment Guide.
|Wheel Size||PCD||Offset||Centre Bore||Load Rating|
Fitments not mentioned above may be available on these wheels using spacer adaptors or vari-bolts, (please email us if unsure about this).
The Offset on this alloy wheel is ET40 for both 20×8.5 inch sizes and for 20×10 inch sizes.
This alloy wheel is load rated to 850kg per wheel.
The Centre bore size is 74.1mm, (any car smaller than this it will fit the centre bore).
You may use a different offset to the manufacturer’s standard wheel, (for example to create a wider track).
Some vehicles may require wheel spacers and arch modifications for fitment, please check before ordering.
Please note: The Axe EX30 Gloss Grey comes with a fitting kit including spigots for smaller centre bore vehicles. Including nuts or bolts if current ones are also no longer suitable.
Please Note: These wheels are also originally supplied blank from the factory, and are custom drilled to your fitment. Delivery will more than likely be 1-3 days extra.
For any further information on Axe wheels including images of wheels on different vehicles, you can visit the Axe Wheels Facebook page.