Forzza Limit Silver Machined 18″
£666.67 – £691.67
Forzza Limit Silver Machined 18-inch alloy wheels (Set of 4 wheels).
This wheel is available staggered in 18×8.5″ and 18×9.5″ sizes.
This alloy wheel is a directional alloy wheel and is available as both left and right direction wheels.
This alloy wheel is a flat-faced multi-spoke design alloy wheel.
The Forzza Limit Silver Machined are left and right-sided alloy wheels available in 5×100, 5×112, 5×114.3 and 5×120 PCD fitments to fit a range of Euro and Japanese cars plus others.
Forzza Limit Silver Machined 18″
Description
Forzza Limit Silver Machined 18-inch alloy wheels (Set of 4 wheels).
This wheel is available in 18×8.5″ and 18×9.5″ sizes.
This alloy wheel is a directional alloy wheel and is available as both left and right direction wheels.
This alloy wheel is a flat-faced multi-spoke design alloy wheel.
The Forzza Limit Silver Machined are left and right-sided alloy wheels available in 5×100, 5×112, 5×114.3 and 5×120 PCD fitments to fit a range of Euro and Japanese cars plus others.
Available in 5×100 and 5×112 PCD to fit many 5 stud vehicles:
5×100: 5 stud Toyota, Subaru, Older Audi, Seat, Skoda, Volkswagen, Chevrolet, Chrysler plus others.
5×112: Audi, Seat, Skoda, Volkswagen, Some BMW, Mercedes, Larger Mini plus others.
PCD 5×114.3 to fit most: Newer Subaru, Lexus, Mazda, Suzuki, Toyota, Nissan, Renault, Infiniti, Mitsubishi, Daihatsu, Hyundai, Kia, Jeep, Chrysler, Large Ford, Newer TVR plus others.
5×120: BMW, Land Rover, Tesla, Commercial VW, Bentley, Larger Mini plus others.
If you would like to find out your wheel stud or lug fitment please see our Alloy Wheel Fitment Guide.
The Forzza Limit Silver Machined alloy wheel is available in the following fitments:
| Wheel Size | PCD | Offset | Centre Bore | Load Rating | |
| Left | 18×8.5” | 5×100 | ET35 | 73.1mm | 690kg |
| Right | 18×8.5” | 5×100 | ET35 | 73.1mm | 690kg |
| Left | 18×8.5” | 5×112 | ET42 | 66.5mm | 690kg |
| Right | 18×8.5” | 5×112 | ET42 | 66.5mm | 690kg |
| Left | 18×8.5” | 5×114.3 | ET35 | 73.1mm | 690kg |
| Right | 18×8.5” | 5×114.3 | ET35 | 73.1mm | 690kg |
| Left | 18×9.5” | 5×114.3 | ET35 | 73.1mm | 690kg |
| Right | 18×9.5” | 5×114.3 | ET35 | 73.1mm | 690kg |
| Left | 18×8.5” | 5×120 | ET35 | 72.6mm | 690kg |
| Right | 18×8.5” | 5×120 | ET35 | 72.6mm | 690kg |
| Left | 18×9.5” | 5×120 | ET35 | 72.6mm | 690kg |
| Right | 18×9.5” | 5×120 | ET35 | 72.6mm | 690kg |
This alloy wheel is load rated to 690kg per wheel.
Fitments not mentioned above may be available on this alloy wheel using spacer adaptors or vari-bolts, (please contact us if unsure about this).
You may use a different offset to the manufacturer’s standard wheel, (for example to create a wider track).
Some vehicles may require wheel spacers and arch modifications for fitment, please check before ordering.
Please note: The Forzza Limit Silver Machined will come with a fitting kit free of charge. This applies if the wheel will not directly fit the centre bore and also if current nuts or bolts are no longer suitable.
For any further info on Forzza wheels including images of wheels on different vehicles, you can visit the Forzza Facebook page.
Additional information
| Wheel PCD | 5×100, 5×112, 5×114.3, 5×120 |
|---|---|
| Wheel Size | 18×8.5" all round, 18×8.5" Front, 18×9.5" Rear (staggered), 18×9.5" all round |
Size Chart
| Wheel Size | PCD | Offset | Centre Bore | Load Rating | |
| L | 18x8.5” | 5x100 | ET35 | 73.1mm | 690kg |
| R | 18x8.5” | 5x100 | ET35 | 73.1mm | 690kg |
| L | 18x8.5” | 5x112 | ET42 | 66.5mm | 690kg |
| R | 18x8.5” | 5x112 | ET42 | 66.5mm | 690kg |
| L | 18x8.5” | 5x114.3 | ET35 | 73.1mm | 690kg |
| R | 18x8.5” | 5x114.3 | ET35 | 73.1mm | 690kg |
| L | 18x9.5” | 5x114.3 | ET35 | 73.1mm | 690kg |
| R | 18x9.5” | 5x114.3 | ET35 | 73.1mm | 690kg |
| L | 18x8.5” | 5x120 | ET35 | 72.6mm | 690kg |
| R | 18x8.5” | 5x120 | ET35 | 72.6mm | 690kg |
| L | 18x9.5” | 5x120 | ET35 | 72.6mm | 690kg |
| R | 18x9.5” | 5x120 | ET35 | 72.6mm | 690kg |
Reviews
There are no reviews yet.