Ronal R10 Turbo Diamond Cut 15″
£725.08
Ronal R10 Turbo Diamond Cut (also known as Black Front Diamond Cut) 15-inch alloy wheels (set of 4 wheels).
15×7″ size available only.
This alloy wheel is a Flat-Face, Multi-Spoke design alloy wheel.
The Ronal R10 Turbo Diamond Cut alloy wheel is available in 4 stud fitment for most small and many older cars.
Ronal R10 Turbo Diamond Cut 15″
Related products
-
Riviera RV191 Satin Black 20″
£928.20 – £999.60 Select optionsQuick View -
Axe AT7 Satin Black 20″
£1,210.00 Add to basketQuick View -
Lenso Spec B Matt Black 17″
£625.00 Read moreQuick View -
BBS CI-R Satin Platinum with Stainless Steel Rim Protector (sold in pairs) 19″, 20″
£1,242.91 – £1,424.17 Select optionsQuick View
Description
Ronal R10 Turbo Diamond Cut (also known as Black Front Diamond Cut) 15-inch alloy wheels (set of 4 wheels).
15×7″ size available only.
This alloy wheel is a Flat-Face, Multi-Spoke design alloy wheel.
The Ronal R10 Turbo Diamond Cut alloy wheel is available in 4 stud fitment for most small and many older cars.
The wheel is available in 4 stud 4×98, 4×100 and 4×108 PCD fitments only.
4×98: 4 stud Alfa Romeo, Fiat, Lancia plus others.
4×100: Most small 4 stud cars, older classic 4 stud vehicles such as BMW 3 series E30 plus others.
4×108: 4 Stud Ford, Citroen, Peugeot, Volvo, Older TVR, Older Alfa Romeo plus others.
If you would like to find out your wheel stud or lug fitment please see our Alloy Wheel Fitment Guide.
The Ronal R10 Turbo Diamond Cut is available in the following fitments:
| Wheel Size | PCD | Offset | Centre Bore | Load Rating | |
| 1 | 15×7” | 4×98 | ET37 | 68.0mm | 560kg |
| 2 | 15×7” | 4×100 | ET28 | 68.0mm | 560kg |
| 3 | 15×7” | 4×100 | ET37 | 68.0mm | 560kg |
| 4 | 15×7” | 4×108 | ET38 | 68.0mm | 560kg |
Other fitments may be available on these wheels using spacer adaptors or vari-bolts, (please contact us if unsure about this).
The Offset for this alloy wheel varies, see the list.
Centre bore size also varies, see the list again. (any car smaller than this will fit the centre bore).
The load rating for this wheel is 560kg per wheel.
You may use a different offset to the manufacturer’s standard wheel, (for example to create a wider track).
Some vehicles may require wheel spacers and arch modifications for fitment, so please check before ordering.
This rim has TUV approval. For more information in detail regarding TUV and ABE reports, visit the Ronal technical guide page.
Please note The Ronal R10 Turbo Diamond Cut comes with a fitting kit free if the wheel does not directly fit the centre bore. Likewise, this includes if current nuts or bolts are no longer suitable.
Note: This wheel brand usually comes from European stock, therefore delivery to the UK (and some other countries) may take longer. Please allow around 10-15 days for delivery.
Additional information
| Fitment variation | 15×7" ET37 PCD 4×98 Centre Bore 68mm, 15×7" ET28 PCD 4×100 Centre Bore 68mm, 15×7" ET37 PCD 4×100 Centre Bore 68mm, 15×7" ET28 PCD 4×108 Centre Bore 76mm |
|---|
Size Chart
| Wheel Size | PCD | Offset | Centre Bore | Load Rating | |
| 1 | 15x7” | 4x98 | ET37 | 68.0mm | 560kg |
| 2 | 15x7” | 4x100 | ET28 | 68.0mm | 560kg |
| 3 | 15x7” | 4x100 | ET37 | 68.0mm | 560kg |
| 4 | 15x7” | 4x108 | ET38 | 68.0mm | 560kg |
Reviews
There are no reviews yet.