Papa Smith Custom Logo - the online store for performance modified and custom car parts

Yanar Y-NL17 Carbon Machined 19"

£850.00£880.00

Yanar Y-NL17 Carbon Machined finish 19-inch alloy wheels (Set of 4 wheels).

19×8.5″ and 19×9.5″ `sizes are available.

This wheel can be had as the same size all-around or as staggered (wider rear) and is also available in other finishes.

This alloy wheel is a multi or 10-spoke design alloy wheel.

The Yanar Y-NL17 Carbon Machined wheel is available in 5×112 and 5×120 PCD fitment.

Clear

Description

Yanar Y-NL17 Carbon Machined finish 19-inch alloy wheels (Set of 4 wheels).

19×8.5″ and 19×9.5″ `sizes are available.

This wheel can be had as the same size all-around or as staggered (wider rear) and is also available in other finishes.

This alloy wheel is a multi or 10-spoke design alloy wheel.

The Yanar Y-NL17 Carbon Machined wheel is available in 5×112 and 5×120 PCD fitment.

Available in 5×112 and 5×120 pcd to fit many 5 stud vehicles:

5×112: Audi, Seat, Skoda, Volkswagen, Some BMW, Mercedes, Larger Mini plus others.

5×120: BMW, Land Rover, Tesla, Commercial VW, Bentley, Larger Mini plus others.

If you would like to find out your wheel stud or lug fitment please see our Alloy Wheel Fitment Guide.

This alloy wheel is available in the following fitments only:

Wheel Size PCD Offset Centre Bore Load Rating
1 19×8.5” 5×112 ET42 66.6mm 700kg
2 19×8.5” 5×120 ET33 72.6mm 700kg
3 19×9.5” 5×120 ET40 72.6mm 700kg

This alloy wheel has a load rating of 700kg per wheel.

Yanar Y-NL17 Carbon Machined centre bore varies, see the above table, (any car smaller than this will fit the centre bore).

Fitments not mentioned above may be available on this alloy wheel using spacer adaptors or vari-bolts, (please contact us if unsure about this).

You may use a different offset to the manufacturer’s standard wheel, (for example to create a wider track).

Some vehicles may require wheel spacers and arch modifications for fitment, please check before ordering.

Please note: The Yanar Y-NL17 Carbon Machined will come with a fitting kit free of charge. This applies if the wheel can’t directly fit the centre bore and also if current nuts or bolts are no longer suitable.

Please note: These wheels come from European stock so will typically take 6-8 working days to arrive.

For any further information on Yanar wheels including images of wheels on different vehicles, you can visit the Yanar Facebook page.

Additional information

Wheel size

19×8.5" all-round, 19×8.5" front, 19×9.5" rear (staggered), 19×9.5" all-round, 20×8.5" all-round, 20×8.5" front, 20×10" rear (staggered), 20×10" all-round

Wheel Fitment PCD

5×112, 5×120

Reviews

There are no reviews yet.

Be the first to review “Yanar Y-NL17 Carbon Machined 19″”

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Size Chart

Wheel Size PCD Offset Centre Bore Load Rating
1 19x8.5” 5x112 ET42 66.6mm 700kg
2 19x8.5” 5x120 ET33 72.6mm 700kg
3 19x9.5” 5x120 ET40 72.6mm 700kg
X

Newsletter

Sign up to our newsletter