Axe CF1 Gloss Black Polished Face Compression Forged 20-inch alloy wheels (set of 4 wheels).
20×9″ and 20×10.5″ sizes are available.
Axe CF1 is available in the same size all round or in staggered fitments (wider rear).
The Axe CF1 is also available in various other finishes.
The Axe CF1 Gloss Black Polished Face is a strong, load rated, split style, multi-spoke alloy wheel.
Axe CF1 Gloss Black Polished Face custom fitments – various 5 Stud cars from 5×108 pcd to 5×130 pcd.
To find out your wheel stud/lug fitment have a look at our Alloy Wheel Fitment Guide.
This alloy wheel is available in the following fitments:
|Wheel Size||PCD||Offset||Centre Bore||Load Rating|
Fitments not mentioned above may still be available in all sizes through custom fitment machining. Spacer adaptors or vari bolts could also be used to allow fitting if your vehicle is outside of the pcd fitment range, (please email us if unsure about this).
Offsets vary depending on the size(s) chosen. 20×9″ size comes in ET25, ET32 and ET38. 20×10.5″ size comes in either ET25 or ET42. For the 20×11″ it is ET48. (State when ordering, ask us if unsure!).
This alloy wheel has a load rating of 815kg per wheel.
Centre bore size is 74.1mm, (any car smaller than this it will fit the centre bore).
You may use a different offset to the manufacturer standard wheel, (for example to create a wider track).
Some vehicles may require wheel spacers and arch modifications for fitment, please check before ordering.
Please note: The Axe CF1 Gloss Black Polished will come with a fitting kit free of charge. This applies if wheel can’t directly fit centre bore and also if current nuts or bolts are no longer suitable.
Please Note: These wheels come as a blank centre from the factory, and need custom drilling to your fitment. Delivery will more than likely be 1-3 days extra.
For any further information on Axe wheels including images of wheels on different vehicles, you can visit the Axe Facebook page.