Axe EX10 Gloss Black Polished Lip finish 18-inch alloy wheels (Set of 4 wheels).
18×8″ size only available.
Available as the same size all round only, for staggered fitment see the silver version.
This is a classic style Y spoke or mesh design wheel and is available in 3 other colours.
The Axe EX10 Gloss Black Polished Lip is available in fitment for most 4 and 5 stud PCD vehicles.
The wheel is available in 4×98, 4×100, 4×108 and 4×114.3 – 4 stud fitments.
Available in 5×98, 5×100, 5×105, 5×108, 5×110, 5×112, 5×114.3, 5×115, 5×118, 5×120 and 5×120.6 – 5 stud fitments.
To find out your wheel stud/lug fitment have a look at our Alloy Wheel Fitment Guide.
This alloy wheel has an offset of ET40.
Load rated to 700kg each wheel.
Fitments not mentioned above may still be available on these wheels through custom fitment machining. Spacer adaptors or vari bolts could also be used to allow fitting if your vehicle is outside of the pcd fitment range, (please email us if you are unsure about this).
Centre bore size is 73.1mm. (any car smaller than this will fit the centre bore).
You may use a different offset to the manufacturer standard wheel, (for example to create a wider track).
Some vehicles may require wheel spacers and arch modifications for fitment, please check before ordering.
Please note: The Axe EX10 Gloss Black Polished will come with a fitting kit free of charge. This applies if wheel can’t directly fit centre bore and also if current nuts or bolts are no longer suitable.
Please Note: These wheels come as a blank centre from the factory, and need custom drilling to your fitment. Delivery will more than likely be 1-3 days extra.
For any further information on Axe wheels including images of wheels on different vehicles, you can visit the Axe Facebook page.