Description
Axe EX30 Black Polished and Tinted 20-inch alloy wheels (set of 4 wheels).
20×8.5″ and 20×10″ sizes are available.
This alloy wheel can be had as the same size all-around or staggered fitment (wider rear) and is also available in various other finishes.
This is a strong, load-rated, Y-spoke or multi-spoke design alloy wheel.
Axe EX30 Black Polished and Tinted will fit most 5 Stud PCD cars.
To find out your wheel stud/lug fitment have a look at our Alloy Wheel Fitment Guide.
Wheel Size | PCD | Offset | Centre Bore | Load Rating |
20×8.5” | 5×108-5×120.6 | ET40 | 74.1mm | 850kg |
20×10” | 5×108-5×120.6 | ET42 | 74.1mm | 850kg |
Fitments not mentioned above may be available on these wheels using spacer adaptors or vari-bolts, (please email us if unsure about this).
The Offset on this alloy wheel is ET40 on 20×8.5 inch size. For 20×10 inch size, it is ET42.
This alloy wheel is load rated to 850kg in 20×8.5″ and 20×10″ size (per wheel).
The centre bore size is 74.1mm, (any car smaller than this will fit the centre bore).
You may use a different offset to the manufacturer’s standard wheel, (for example to create a wider track).
Some vehicles may require wheel spacers and arch modifications for fitment, please check before ordering.
Please note: The Axe EX30 Black Polished and Tinted comes with a fitting kit including spigots for smaller centre bore vehicles. Including nuts or bolts if current ones are also no longer suitable.
Please Note: These wheels are also supplied initially blank from the factory, and are custom drilled to your fitment. Delivery will more than likely be 1-3 days extra.
For any further information on Axe wheels including images of wheels on different vehicles, you can visit the Axe Wheels Facebook page.
Reviews
There are no reviews yet.