Calibre CC-U Matt Gunmetal 20″
£540.83 – £586.25
Calibre CC-U Matt Gunmetal 20-inch alloy wheels (set of 4 wheels).
Available in 20″x9″ size only.
This alloy wheel is a load rated 10 spoke or multi-spoke wheel design.
This wheel is also available in 3 other finishes.
Calibre CC-U Matt Gunmetal, a direct fit for VW T5, T6 Transporter, VW Amarok, VW Toureg VR5 TDI plus other 5 stud cars.
Calibre CC-U Matt Gunmetal 20″
Related products
-
Riviera RV191 Satin Black 20″
£773.50 – £833.00 Select optionsQuick View -
Lenso Spec B Matt Black 17″
£520.83 Read moreQuick View -
BBS SR Satin Volcano Grey Polished Face 17″, 18″, 19″
£453.14 – £690.51 Select optionsQuick View -
BBS CH-R II Satin Black (Sold in Pairs) 20″, 21″, 22″
£1,564.43 – £1,969.03 Select optionsQuick View
Description
Calibre CC-U Matt Gunmetal 20-inch alloy wheels (set of 4 wheels).
Available in 20″x9″ size only.
This alloy wheel is a load rated 10 spoke or multi-spoke wheel design.
This wheel is also available in 3 other finishes.
Calibre CC-U Matt Gunmetal, a direct fit for VW T5, T6 Transporter, VW Amarok, VW Toureg VR5 TDI plus other 5 stud cars.
This offset of this alloy wheel is ET45.
To find out your wheel stud/lug fitment please see our Alloy Wheel Fitment Guide.
Load ratings (per wheel) and centre bore are also included as below:
| Wheel Size | PCD | Offset | Centre Bore | Load Rating |
| 20×9” | 5×108 | ET45 | 73.1mm | 815kg |
| 20×9” | 5×112 | ET45 | 73.1mm | 815kg |
| 20×9” | 5×120 | ET45 | 65.1mm | 815kg |
Fitments not mentioned above may still be available on this wheel. Spacer adaptors or vari-bolts might allow fitting if the vehicle is outside of the pcd fitment range. Please email us if you are unsure. The Centre bore size is 65.1mm, (any car smaller than this ..0wi
.ll fit the centre bore).
This wheel is load rated to 815kg per wheel (all fitments).
You may use a different offset to the manufacturer’s standard wheel, (for example to create a wider track).
Some vehicles may require wheel spacers and arch modifications for fitment, please check before ordering.
Please note: The Calibre CC-U Matt Gunmetal will come with a fitting kit free of charge. This applies if the wheel can’t directly fit the centre bore and also if current nuts or bolts are no longer suitable.
For any further information on Calibre alloy wheels including images of wheels on different vehicles, you can visit the Calibre Wheels Facebook page.
Additional information
| Fitment Variation | 20×9” ET45 5×112 73.1mm Centre Bore, 20×9” ET45 5×120 65.1mm Centre Bore |
|---|
Reviews
There are no reviews yet.