Wrath WF4 Black Polish Face finish 20-inch alloy wheels (Set of 4 wheels).
20×8.5″, and 20×10″ sizes are available.
This wheel is also available in 1 other finish.
This alloy wheel is a directional 10-spoke design alloy wheel.
The Wrath WF4 Black Polish wheel is available in 5×112 and 5×120 PCD fitments.
Available in 5×112 and 5×120 pcd to fit many 5 stud vehicles:
5×112: Audi, Seat, Skoda, Volkswagen, Some BMW, Mercedes, Larger Mini plus others.
5×120: BMW, Land Rover, Tesla, Commercial VW, Bentley, Larger Mini plus others.
If you would like to find out your wheel stud or lug fitment please see our Alloy Wheel Fitment Guide.
This alloy wheel is available as either the same size all-round, in 20×8.5, 20×10 sizes, or staggered fit (wider rear).
Wrath WF4 Black Polish Face centre bore sizes as above. (any car smaller than this will fit the centre bore).
The offset of this wheel is ET40 for 8.5″ wide and ET42 for 10″ wide sizes.
Fitments not mentioned above may be available on this alloy wheel using spacer adaptors or vari-bolts, (please contact us if unsure about this).
This alloy wheel is load rated to 815kg per wheel.
You may use a different offset to the manufacturer’s standard wheel, (for example to create a wider track).
Some vehicles may require wheel spacers and arch modifications for fitment, please check before ordering.
Please note: The Wrath WF4 Black Polish Face will come with a fitting kit free of charge. This applies if the wheel can’t directly fit the centre bore and also if current nuts or bolts are no longer suitable.
Please note: These wheels come from European stock so will typically take 6-8 working days to arrive.
For any further information on Wrath wheels including images of wheels on different vehicles, you can visit the Wrath Facebook page.