Wrath WF7 Gloss Black Polished Face finish 18 and 19-inch alloy wheels (Set of 4 wheels).
Available in 18×8″, 18×9″, 19×8.5″, and 19×9.5″ sizes.
This alloy wheel can be had the same size all around or staggered (wider rear).
This alloy wheel is a Y spoke design alloy wheel.
The Wrath WF7 Black Polished Face wheel is available in 5×112 and 5×120 PCD fitments.
Available in 5×112 and 5×120 pcd to fit many 5 stud vehicles:
5×112: Audi, Bentley. Seat, Skoda, Volkswagen, Some BMW, Mercedes, Larger Mini plus others.
5×120: BMW, Land Rover, Tesla, Commercial VW, Bentley, Larger Mini plus others.
If you would like to find out your wheel stud or lug fitment please see our Alloy Wheel Fitment Guide.
This alloy wheel is available in the following fitments:
|Wheel Size||PCD||Centre Bore||Offset|
Wrath WF7 Black Polished Face centre bore sizes as above. (any car smaller than this it will fit the centre bore).
This alloy wheel is load rated to 715kg per wheel.
Fitments not mentioned above may be available on this alloy wheel using spacer adaptors or vari-bolts, (please contact us if unsure about this).
You may use a different offset to the manufacturer standard wheel, (for example to create a wider track).
Some vehicles may require wheel spacers and arch modifications for fitment, please check before ordering.
Please note: The Wrath WF7 Black Polished Face will come with a fitting kit free of charge. This applies if the wheel can’t directly fit the centre bore and also if current nuts or bolts are no longer suitable.
For any further information on Wrath wheels including images of wheels on different vehicles, you can visit the Wrath Facebook page.