Forzza Flamber Hyper Black Machined 17″, 18″
£550.00 – £712.50
Forzza Flamber Hyper Black Machined 17 and 18-inch alloy wheels (Set of 4 wheels).
This is a Dual Fitment (2x fitment PCD) wheel, see the table below for options.
17×7.5″, 18×8.5″ and 18×9.5″ sizes are available.
This wheel is available as the same size all-round and as staggered (wider rear).
This alloy wheel is a Polished Lip 5-spoke design alloy wheel.
The Forzza Flamber Hyper Black Machined is available in 5×100, 5×112, 5×114.3 and 5×120 PCD fitment to fit many Japanese and European cars.
Forzza Flamber Hyper Black Machined 17″, 18″
Related products
-
Axe AT7 Satin Black 20″
£1,008.33 Add to basketQuick View -
Dirt A.T D01 Matt Black Chrome Inserts 18″, 20″
£741.67 – £908.33 Select optionsQuick View -
Calibre Motion Gunmetal 15″, 17″, 18″
£314.13 – £455.00 Select optionsQuick View -
Supermetal Trident Matt Grey Polished Rim 20″
£683.33 Select optionsQuick View
Description
Forzza Flamber Hyper Black Machined 17 and 18-inch alloy wheels (Set of 4 wheels).
This is a Dual Fitment (2x fitment PCD) wheel, see the table below for options.
17×7.5″, 18×8.5″ and 18×9.5″ sizes are available.
This wheel is available as the same size all-round and as staggered (wider rear).
This alloy wheel is a Polished Lip 5-spoke design alloy wheel.
The Forzza Flamber Hyper Black Machined is available in 5×100, 5×112, 5×114.3 and 5×120 PCD fitment to fit many Japanese and European cars.
Available in 5×114.3 and 5×120 PCD to fit many 5 stud vehicles:
5×100: 5 stud Toyota, Subaru, Older Audi, Seat, Skoda, Volkswagen, Chevrolet, Chrysler plus others.
5×112: Audi, Seat, Skoda, Volkswagen, Some BMW, Mercedes, Larger Mini plus others.
5×114.3: Newer Subaru, Lexus, Mazda, Suzuki, Toyota, Nissan, Renault, Infiniti, Mitsubishi, Daihatsu, Hyundai, Kia, Jeep, Chrysler, Large Ford, Newer TVR plus others.
5×120: BMW, Land Rover, Tesla, Commercial VW, Bentley, Larger Mini plus others.
If you would like to find out your wheel stud or lug fitment please see our Alloy Wheel Fitment Guide.
The Forzza Flamber Hyper Black Machined alloy wheel is available in the following fitments:
| Wheel Size | PCD 1 and 2 | Offset | Centre Bore | Load Rating | |
| 1 | 17×7.5” | 5×112/5×120 | ET35 | 74.1mm | 690kg |
| 2 | 18×8.5” | 5×100/5×112 | ET25 | 73.1mm | 690kg |
| 3 | 18×8.5” | 5×114.3/5×120 | ET25 | 74.1mm | 690kg |
| 4 | 18×9.5” | 5×114.3/5×120 | ET20 | 74.1mm | 690kg |
Centre bore sizes are as above. Any car smaller than this will fit the centre bore.
Fitments not mentioned above may be available on this alloy wheel using spacer adaptors or vari-bolts, (please contact us if unsure about this).
You may use a different offset to the manufacturer’s standard wheel, (for example to create a wider track).
Some vehicles may require wheel spacers and arch modifications for fitment, please check before ordering.
Please note: The Forzza Flamber Hyper Black Machined will come with a fitting kit free of charge. This applies if the wheel will not directly fit the centre bore and also if current nuts or bolts are no longer suitable.
For any further info on Forzza wheels including images of wheels on different vehicles, you can visit the Forzza Facebook page.
Additional information
| Wheel size | 17×7.5" all-round, 18×8.5" all-round, 18×8.5" front, 18×9.5" rear (staggered), 18×9.5" all-round |
|---|---|
| Wheel Fitment PCD | 5×100/5×112 Dual Fitment, 5×112/5×120 Dual Fitment, 5×114.3/5×120 Dual Fitment, 5×114.3/5×120 Dual Fitment (nearly new) |
Size Chart
| Wheel Size | PCD 1 and 2 | Offset | Centre Bore | Load Rating | |
| 1 | 17x7.5” | 5x112/5x120 | ET35 | 74.1mm | 690kg |
| 2 | 18x8.5” | 5x100/5x112 | ET25 | 73.1mm | 690kg |
| 3 | 18x8.5” | 5x114.3/5x120 | ET25 | 74.1mm | 690kg |
| 4 | 18x9.5” | 5x114.3/5x120 | ET20 | 74.1mm | 690kg |
Reviews
There are no reviews yet.