Axe CF1 Gloss Silver Compression Forged 20-inch alloy wheels (set of 4 wheels).
20×9″, 20×10.5″ and 20×11″ sizes are available.
Axe CF1 is available the same size all-round or in various staggered fitments (wider rear).
The Axe CF1 is also available in 3 other finishes.
This is a strong, load rated, split style, multi-spoke alloy wheel.
Axe CF1 Gloss Silver custom fitments – various 5 Stud cars from 5×108 pcd to 5×130 pcd.
To find out your wheel stud/lug fitment please see our Wheel PCD guide on calculating or measuring PCD (Pitch Circle Diameter).
Fitments not mentioned above may still be available on all sizes through custom fitment machining. Spacer adaptors or vari bolts could also be used to allow fitting if your vehicle is outside of the pcd fitment range, (please email us if unsure about this).
Offsets vary depending on the size(s) chosen. 20×9″ size comes in ET25, ET32, ET38 and ET45. 20×10.5″ size comes in either ET25 or ET42, and for the 20×11″, either ET48 or ET62 (state when ordering, ask us if unsure!).
Load rated to 815kg per wheel.
Centre bore size is 74.1mm, (any car smaller than this it will fit the centre bore).
You may use a different offset to the manufacturer standard wheel, (for example to create a wider track).
Some vehicles may require wheel spacers and arch modifications for fitment, please check before ordering.
Please note: a fitting kit will be supplied free of charge if the wheel is not a direct fit to centre bore and current nuts or bolts are no longer suitable.
Please Note: The Axe CF1 Gloss Silver wheel is originally supplied blank from the factory. This is for custom drilling to your fitment, delivery will more than likely be 1-3 days extra.
For any further information on Axe wheels including images of wheels on different vehicles, you can visit the Axe Wheels Facebook page.